Nahimic only supports jack devices. USB headsets have their own drivers, audio processing and software which are completely independent of Nahimic.

You can close Nahimic interface but the audio effects you chose will still be activated until you manually switch them off from the interface.

If you switch OFF the global button in Audio and Micro tab, and then close Nahimic interface, then you would have fully deactivated all Nahimic features.

The default device (playback and/or recording) selected in Windows® device manager is the device that allows you to hear or capture sound.

Here follows our MSI lapotps which run Nahimic 3.

Tip: CTRL+F could help to find your model

Yes, there’s a separate volume bar for front speaker and rear speaker, so you can adjust accordingly based on your need.

You have an incompatibility issue with Nahimic and your application/game is crashing? 

Since Nahimic v1.4.14 we have implemented a new setting call "Sound Tracker Engine". Let it disabled to avoid any conflict between Nahimic and other programs. 

1. Go in the Settings page 

2. Disable the Sound Tracker Engine 

Now you will avoid any incompatibility issue with other running application/game.

Therefore, the Sound Tracker feature is unusable.

If you can feel a delay between your front device (i.e: internal speakers) and your rear device (Bluetooth speakers) you can use the "Delay" bar to adjust the latency. As latency is mainly due to hardware (from Bluetooth technology), if the latency is really important, we suggest you to change a Bluetooth speaker to a more recent one.

Here follows our Lenovo Legion lapotps which run Nahimic 3.

You can reinstall Nahimic 3 application from the Microsoft store.

If you have uninstalled the driver part too, you can find on your manufacturer's website the latest audio driver available from your system.

It’s possible that your Windows® audio settings disabled all audio effects on your device. To turn them on, just follow these instructions: 1 - On your Windows® taskbar, right-click on the volume icon. 2 - Click on Playback devices or Recording devices, depending on the devices you are interested in. Playback devices are audio devices, like speakers or headphones. Recording devices are capture devices, like microphones. You may have to apply these instructions to both. 3 - Right click on your current default device and click on Properties. 4 - Click on the Enhancements tab and make sure the disabling

1. Before posting a topic, please be sure the question wasn't asked before by using the search bar. Duplication may be deleted and the user may be given a warning.

2. Posts are to be made in the relevant section. Users are asked to read the section descriptions before Users consistently posting to the wrong section may be given a warning.

   Members should post in a way that is respectful of other users. Flaming or abusing users in any way will not be tolerated.

3. Members can help other members. Be aware if you are talking to a members or an admin.

4. Members should remember

In order to update Nahimic driver, please launch the attached tool that will process to detect your hardware, check your system updates, clean and install everything needed to get Nahimic working again with latest driver updates.